Customer Questions and Answers for Oven Door Hinge by Whirlpool

Art, The manufacturer does not provide any specific instructions related to installation of the hinges but, here is the service manual information, " Oven Door Removal 1. Open oven door as wide as possible. 2. Place a 1/8" pin in the hole on the right and left door hinges. 3.Remove the screws from each side with a Phillips screwdriver. Remove the lock plate from each side. 4. Raise the oven door up to a broil stop position. In this position,it will be against the 1/8" pin. 5. Grasp the door toward the top on both sides. Lift the door up and out to remove. Oven Door Hinge Replacement 1. Remove two screws from oven inner door panel that mount into the lower portion of oven door hinge assembly. 2. Grasp and lift oven door hinge assembly upward and slide down to disengage upper tabs from the door panel. 3. To reassemble the oven door, reverse the procedures for disassembling." Thanks and Good Luck