Customer Questions and Answers for Dryer Top Hinge by Whirlpool

Vivian, You will need to remove the lint filter, once removed, you'll need to remove the two phillips head screws holding the filter housing to the top of the dryer. You will need a putty knife or flat blade tool, approximately 3 to 4 inches in from the side panels there is a spring clip, located in the seam between the top and the front panel, use the tool to press in on the spring clip, and lift up on the corner of the top until it releases from the clip. Youi can then raise the top and access the interior or remove the top as necessary. Good Luck and Thanks