Lee for Model Number ktrs20kawh10 I've received my kit for the above model refridgerator. There is however, a few small problems. The manufacture date on my kitchenaide is 08-94. It been pre-wired and made ready for an ice maker kit. The kit that came will not work for two reasons. The main plug in the back of my unit is square, where the wire harnes on the ice make you sent is round on one side and square on the other. Both connectors have four pins. Yours has a brwon, green, black, and wihte wire. Mine has 2 grean in one pin, 2 white wires in one pin, 1 black, and 1 brown wire. The connector in mine is square. Additioanlly, when I observe the back of the unit and dropped the cover. I though I would see a couple of extra, single pin connectors for the water valve. There are none. I searched everywhere on that side where the fan is, there are no extra leads to hook anything up. So, I'm sure I'll be having to send this back. Regards, Lee
Answer Hi Lee. All you should need to do is to use the correct wiring harness for your ice maker. You can unhook it from the ice maker itself by releasing the single center clip on the side of the ice maker. This is a universal kit to adapt for your model given. Ice maker kit part # 1129316. Thank You. Read More... Answered by AppliancePartsPros.com | Tuesday, March 20, 2012