Gerald B for Model Number Jenn-Air CCE3401B Ordered a 12002125 switch to replace faulty Left Rear burner switch. The new 12002125 switch and the old switch have different terminals. Here is how I connected: * Attached the Black wire from the old switch (terminal 2) to the new switch terminal P1. Also attached jumper wire between P1 and S1. * Attached Light Red wire from old switch terminal 5 to S2 on the new switch. * Attached Shiny Blue wire from old switch terminal 4 to 4a on the new switch. * Attached Shiny Black wire from old switch terminal 3 to terminal 4 on the new switch. * On old switch two Red wires were crimped together and attached to terminal N. Separated the Red wires from each other and attached the one from power cable to P2 on the new switch. Attached the other newly split Red wire from the Left Front burner switch to terminal 2 on the new switch. Problem I am having is circuit breaker trips as soon as I try to turn on the Left Rear burner using the new switch. What do I have connected wrong?
Answer Gerald, It sounds like you have everything attached properly and would suggest checking for damaged or pinched wiring. Also check the element to make sure that there are no damaged wires. Read More... Answered by AppliancePartsPros.com | Monday, September 24, 2018