Robert for Model Number whirlpool cabrio se wtw6600sw2 Hi. My washer is giving an F51 code for the motor position sensor. What do you think the problem is? Thanks.
Answer Hello Robert. You will need to check and make sure the tub turns freely by hand. If it is tight, you will need to check for something between the inner and the outer tubs. If it is free, you will need to test the motor. With an ohmmeter, check for continuitybetween all pins on the P5 machine/motorcontrol connector and the drive motorconnector.? If there is continuity, replace the drivemotor.? If there is no continuity, replace the lowermachine harness.If the motor is good, you will need to replace the control board WPW10189966. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, July 6, 2011