Sam for Model Number 10651713411 I have had several LED modules in my fridge/freezer either completely off or slightly dim. About 5 total are not working. Concerned that it might be a problem with the LED power supply, I swapped a working one and non working one. The broken one started working and the working one broke when swapping locations. Is it possible the power supply went out? Or could one broken LED module be affecting the rest of them? I'm trying to determine if I should order replacement LED modules but I'm concerned it might not fix the problem if the issue is the power going to the LED modules. But maybe replacing all 5 will fix the issue? I don't think they all went out at once. Any help here would be appreciated.
Answer Hello Sam, thank you for reaching out to AppliancePartsPros.comIt is unlikely to be the LED supply board, usually it is just a bad LED module or 2. The LEDs are wired in series and this model has 3 separate series of LEDs, so if 1 LED in a series goes out the other will appear very dim or go out as well. The easiest way to test is to take a jumper wire and jump out each individual LED in a series that have gone dark until you find the bad one, usually the culprit is in the freezer section but could be in the fridge section.The manufacturer who built this model for Kenmore had a known issue with this and updated the LED modules to help take care of the issue. You can no longer get the individual LED modules, they come as a kit W11683241. This kit has 12 LEDs in it and your model only uses 10, but the manufacturer recommends to replace all of the LEDs at the same time to update them and prevent this issue from returning. Read More... Answered by AppliancePartsPros.com | Monday, February 16, 2026