Jim for Model Number eet171pknr2 replacement kit 4387913 overload kit. Has 2 parts the relay and the overload. The refrig relay/overload has only 2 wires going between them, a red wire into and out of the small drum like part and then to the larger I believe relay. the relay is mounted to the compressor on 2 pins. there is a 2nd wire, white which is connected directly to the compressor on a pin. the new parts, the one has 2 connectors which appear to connect to the 2 pins on the compressor and the other has a connector that could connect to the other pin on the compressor. now, there are 4 terminals on the part with the 2 pins and 1 terminal on the other part with the one pin. how do i wire this up? where does the red wire go. I assume the white wire goes on the part with the single pin because there only one wire connector and it looks like it goes on the compressor pin that had the white wire. any help would be great. thanks
Answer Hello Jim, The red wire would be your hot wire and would go to the overload. The other wires would connect one to each side of the relay. Read More... Answered by AppliancePartsPros.com | Thursday, December 27, 2012