Customer Questions and Answers for Control Panel by Whirlpool

Hello Brian. With the unit in the off mode, press heated dry, normal, heated dry, normal, heated dry, normal. The unit should start running, do not stop it, let it complete. Then every time before starting the dishwasher, you will need to get the water hot at the sink. Also, test the heater W10518394 and the thermostat WP661566 and make sure they are good. They should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html