Customer Questions and Answers for Panel- Con by Whirlpool

Bob, Yes, Thats a great place to start, and is more likely the issue 6-919825 . It's a project you should be able to perform yourself with some basic hand tools and a #15 "Torx" tip driver. Heres some help, The Membrane/Facia on the Control Console is not replaceable. Removal 1. Disconnect power to the machine. 2. Remove the Inner Door Panel. (See paragraph Inner Door Panel removal). 3. Remove PC Board Housing Cover. 4. Disconnect Membrane Switch from PC Board. 5. Remove PC Board Base. 6. Lift out Latch Assembly. 7. Remove 4 screws securing Control Panel to Outer Door. NOTE: Facia is susceptible to damage during reinstallation. Inner Door Panel Removal of the Inner Door Panel will allow access to the Microprocessor Board, Door Switches, Detergent / Rinse Aid Dispenser, and Vent Assembly. Removal 1. Disconnect power to the machine. 2. Open the Dishwasher door. 3. Remove the 11 Torx™ screws along the sides and top of the Inner Door Panel. 4. Separate the Inner Door Panel from the Outer Door. 5. Disconnect wires from the Dispenser Wax Motors before pulling the Inner Door Panel away from the Dishwasher. You'll do fine. Good Luck and Thanks