Jim for Model Number MAH6700AWW Machine will not drain. Put on a new pump. Still will not drain. Are there tests I can do to pin point the problem? If it needs a new control board, is your Mem part No. 9 in your diagram the correct control board?
Answer Hello Jim. Test for power to the drain pump and check the wiring harness. If it is good and there is no power, then replace the board. Number 9 is the board for the unit. Thank you. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, August 28, 2017