Aby for Model Number whirlpool gas dryer lhi5701go Turn on dryer and everything works, blower, drum spins after approximately 30 seconds the igniter glows hear a click and see flames and flame stays on approximately 4 minutes and go off. When next heating cycle begin igniter glows hear a click but no flames, this continues for five six cycle s and I turn off machine. Before doing this I cleaned and vacuumed everything air flow not obstructed and wipe all sensors with dry cloth. I waited 45 minutes and started machine again and all worked well till second heating cycle igniter glows hear click but no flames. machine works ok but only when completely cold . Did this four time until load of cloths dried. which is the culprit the flame sensor, dryer igniter or adjustable dryer cycling thermostat.
Answer Hello Aby. Sounds like the coils on the valve are bad and will need to be replaced on the unit. Unfortunately, the coils are not available separate from the valve and burner assembly, part number 279894. Thanks. Read More... Answered by AppliancePartsPros.com | Friday, June 21, 2013