Marty for Model Number KSRS25FGWH02 I went out of town and turned off the ice maker and water to home. Turned all back on on return and all was fine. Then ice maker started only producing 4 cubes per cycle. I flushed incoming water line and some debris came out, but ice maker still does the same. I also removed fill valves but the screen appeared clear. So is the fill valve partially plugged, or is the control module or ice maker bad? I have tried adjusting the ice size screw, but it hasn't made a difference. Thanks
Answer Hello Marty, The water valve W10408179 will have to be replaced if proper water pressure is being supplied to the unit from the home water supply. You should also try to get the icemaker fill adjustment back as close to the way it was originally to prevent issues with the water fill. As a note, you cannot turn the adjustment screw more than one turn either direction or damage will be incurred on the contracts inside the motor module. Read More... Answered by AppliancePartsPros.com | Wednesday, March 25, 2015