Shep for Model Number MFI2269VEB6 I mam trying to remove the ice maker from the Maytag unit listed. I have talked with four of your people and sent pictures to David of the ice maker compartment. I have not found any help getting the old maker out. THERE ARE NO SCREWS IN THE SIDE WALL. That unit has the same model numbur but the ice maker compartment on mine does not match the one you have a film of showing how to remove three screws and simple removal. My ice maker is mounted on a plastic tray that appears to slide out after depressing a tab on the rail. CAN'T MOVE IT!! I cannot find what is holding the ice maker to the back wall. I removed the three screws in the bottom of the tray and can move the maker around, up and down a half inch but can't pull it forward at all! CAN YOU HELP? I have the manual and can get picctutres on the computer
Answer Hello Shep. You must remove the wire cover on the left wall. Then unplug the wires and release the locking tab at the top of the icemaker and slide the whole assembly, not just the icemaker, out of the housing by pulling it toward you. Now you can replace the icemaker. Read More... Answered by AppliancePartsPros.com | Monday, April 27, 2015
Answer Shep, Simply removing the 3 screws from the bottom will not allow this icemaker to come out. To remove you will need to pull out the ice bin. On the lower left side of the ice compartment there is a cover that needs to be removed. You will see a hole on the cover just below where the head of the icemaker is. Using a small flat blade screwdriver, stick it into the hole at an angle with the handle up. Then pull the handle downward and it will catch the release for the cover. Slide the cover forward. Once this is done then disconnect the wire harness and then at the side of the icemaker there will be a tab, Pull the tab toward the icemaker and slide the entire assembly forward. This will allow for the icemaker to be removed. Read More... Answered by AppliancePartsPros.com | Monday, April 27, 2015