Greg for Model Number Amana SCD19JL (P7804508WL) So my ice maker is as pictured in the BOM (part 19 of https://483cda5f439700fab03b-6195bc77e724f6265ff507b1dc015ddb.ssl.cf1.rackcdn.com/0028535618_4.gif ) you show for this model, where the icemaker attaches to the back of the inside of the refrigerator (the length of the icemaker is parallel to the back of the refrigerator, not the left side). Thus the water fill hole is on the back of the right side of the ice maker, not the right side of it, i.e. the fill tube for my old unit would come in perpendicular to the length of the ice maker on the back right side not parallel to it. The picture of the ice maker replacement part Replacement Icemaker D7824706Q / AP4135008, shows the fill hole for a fill tube coming in parallel to the length of the unit. So what is the best way to handle this?
Answer Hello Greg, thank you for contacting APP, The Icemaker(IM) D7824706Q should be a direct 1:1 replacement for your original IM, the video attached to D7824706Q is for the front-to-back install instead of the side-to-side install, but these IMs are also known as Modular Icemakers due to the fact they were used across many different units and installed a few different ways, there shouldn't be any issues between the new IM and your unit with the fill tube placement. Read More... Answered by AppliancePartsPros.com | Tuesday, June 18, 2024