Customer Questions and Answers for Ice Maker by Whirlpool

Gary, First check the wiring at the valve(s) make sure you don't have any crossed wires The valve coils have to be wired in series or they wont operate. You may want to test the ice maker voltage to the fill valve( using a short length of insulated 14 guage wire, with both ends stripped, and a multi meter or test light attached the the icemaker fill valve wires, insert the end of the wire into the "T" and "H" openings in the front of the ice maker, hold the wires there until the main gear starts to rotate, then remove the wire. When the rake arm reaches the 12 o'clock to 1 o'clock position, the control module should send 120 VAC to the fill valve and the light or meter should indicate the voltage is present. If no voltage is present, then replace the icemaker.