Daniel for Model Number wgd6200sw2 Dryer was working fine 1st load then heard a buzzin sound the igniter kept going on and off. Checked the continuity on senser nothing is it the senser bar?
Answer Hello Daniel. Check the coils and see if they test good. You can test the coils using a multi-meter MA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Test the coils after running the dryer for about 10 minutes. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, July 13, 2015