John T for Model Number KEBS208DBLI I get the error code F3 EO, I have a wall double oven and when I tried to remove the oven sensor by unscrewing the 2 nuts and pulling the wiring through to disconnect the sensor it will not come through. Either the connect is bigger than the hole in the oven or it is stuck on something. Any suggestions?
Answer Hello John. F3 E0: Temp sensor opened. 1 Check connection, 2 Measure for 1080 ohms at 20°. 3 If resistance is not good, replace sensor. 4. If resistance is good, replace control. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, January 6, 2014