Rocco for Model Number GU2455XTSS3 When my dishwasher finishes a normal wash cycle the dishes are very dirty, to the point where I have to use brillo or similar to clean the glasses and dishes over by hand. I checked water temp, 125 degree f. Also removed motor and pump assembly to check screens and chopper, ok. Also looked at impeller which also appears fine. Any help is appreciated.
Answer Hi Rocco. It seems like you have done approx. 75% mechanically what needs to be done. Did you clean all the spray arm jets to insure they are not clogged on the ends or the bottoms also? They can be cleaned out by removing them carefully, and rinsing them out while using a pick tool to dislodge any stuck particles. There are no longer any phosphates in the dishwasher soap powders anymore. This was used to activate the cleaning agents in your soap. Today's soaps are formulated with different agents to release the cleaning agents that are needed for a proper clean. All across the country now this is happening, so don't feel alone. My wife has changed from cascade powder ( 10yrs use) and went to the cascade tablets with the swirl of green and blue on the top. She has physically showed me the difference and "happiness" she enjoys again. I suggest to also use Glisten part # (the water hardness test kit part #W10549845. Or try dishwasher magic part # TJ104. I hope this helps. Thank- You. Read More... Answered by AppliancePartsPros.com | Tuesday, June 28, 2011