Clark for Model Number Whirlpool ThinTwin LTE5243DQ3 I have the exact same problem and symptoms as Ron in the previous question below, but I don't understand how a weak suspension spring would cause the tub to lean down and to the right side; since it appears to counter the weight of the motor assembly on the left side, I would expect exactly the opposite. Can you elaborate on your answer? >>Q: I have a problem with severe shaking during a high-speed spin. I have also noticed that the top of the tub is leaning to the right side of the washer. I have checked the suspension spring and it is OK (not broken or missing). I have inspected the 3 tub springs and they all look OK and not loose. My question is, could these springs be weak and therefore not keeping the tub level? Any info or suggestions are appreciated. Thanks. Asked by Ron for Model Whirlpool LTE 5243DQO >>A: Hello Ron. It sounds like the suspension spring AP4459650 is weak and will need to be replaced. Hope this helps.
Answer Hello Clark. If the suspension spring is weak or broke, it allows the unit to slide on the plate. It can go eith way at this point. Right left front or back on the floater plate. You willl need to check the springs W10207783 and the suspension spring WPW10250667 in the unit and make sure they are good. Hope this helps. Read More... Answered by AppliancePartsPros.com | Wednesday, February 22, 2012