Jason for Model Number MAH4000AWW I have MAH4000AWW and replaced bearings twice to only last about a year before loud bearing noise repeats. I researched other peoples similar fixes and found that a couple people had replaced the entire spindle and upgraded it to the newer seal design. Mine is with the plastic C clip style. I had found one rivet broke and replaced all three spindle rivets with SS bolts and self locking nuts. Bearings are very loud again and need replaced again but I can say there is no obvious balance problems. Im thinking that the bearings might be washing out due to the old tub seal mating surface not seating the seal anymore. now that I remember, Im thinking that the seal mating area in the drum was very corroded away and seal was sloppy after wire wheeling it and replacing with new bearings and seal. how far do I go that is good enough? replace bearings every year? Or find a newer spindle design with the newer seal update.
Answer Hello Jason,the spin bearings wearing out that fast indicate a failed water/tub seal. You may want to just upgrade the spindle that uses the upgraded water seal at this point, part W10181639. Read More... Answered by AppliancePartsPros.com | Monday, October 14, 2019