Dwayne for Model Number MAV7650AWW I cannot get the water/rinse temp to change. Is this because the temp switch is bad or is this something else, like the analogue control board or water valve? Note, the tank fills to correct water level for washing.
Answer Hello Dwayne. This unit uses a thermistor in the water valve 12002158. It distributes the water temperature according to the setting. You will need to test and see if there is power going to the hot water valve, when the machine is set on rinse. If not, and the hot water is coming in, you will need to replace the water valve. If there is power to the hot valve on a cold rinse, you will need to replace the temperature switch WP22002999. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Saturday, August 13, 2011