Kevin O for Model Number GU3600XTSB0 Washer is not filling. I replaced the water inlet valve but that did not fix the problem. The float moves freely and clicks when lifted up and down. Any suggestions on where to look next and how to isolate problem a bit further before putting another part in?
Answer Hello Kevin. Test the float switch. If it is good, and the water is turned on and the wiring is good, then you will need to replace the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, November 28, 2014