Michael for Model Number maytag model # LAW9304AAE When frist starting the machine in small, med., or large load capacity water doesn't want to come in the tub. If you fill tub by hand and set the machine to run in the level of water you have in the tub, it will run through the washing cycle including the rinse cycle. What do I have to do or replace to get the initial water to come in?
Answer Hello Michael. Check and see when empty if the pressure switch is closing to send power to the valve. If not, then replace the pressure switch on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, November 24, 2014