Customer Questions and Answers for Refrigerator Dispenser Micro Switch by Whirlpool

Paul, This appears to be the actuator switch for your WP refrigerator dispenser assembly. so, here are the basic instructions: " 1. Unplug the refrigerator power cord. 2. Remove the overflow grille from the housing. 3. Unsnap front cover at the bottom of the housing. (You'll need to insert the tip of a flat blade tool into the slots molded into the bottom edge of the facade and twist or pry out,you may want to use some type of pad to eliminate damage to the door panel). 4. Disconnect the front cover switch harness connector and set the cover aside. 5. Disconnect the power wire harness connector (BL/BK and W wires) 6. Disconnect the flapper door heater wire harness connector (if one is present). 7. Release the dispenser microswitch retainers and slide the switches off of their locator pins. Carefully handle the switches so they do not come apart." Good Luck and Thanks