Asa for Model Number KEMC308KSS03 Hi, when I attempt to start the microwave it fails and displays "door" on the control display. All other functions seem to work ok. Using guidance from the tech board here, I checked all three door switches, and all checked out ok; good continuity b/w com and nc when switch is not pressed in (door open) and good cont. B/w com and no when switch is pressed (door closed) in via the door. The door latch mechanism works fine, and is not sticking. I used the latch to press and depress the door switches. I inspected the wires and connectors at the controller board and cannot find anything that is obviously loose or pushed back that it would not make connection to the board. Can you give me some advice on what to do next? New controller board? Fyi: some background, I did just replace the light bulb and the diode just weeks prior to this issue cropping up. Thanks in advance, -asa
Answer Hello Asa, If you are sure the door switches, latch, and wiring are good, then the only thing left is the control board on the unit. Read More... Answered by AppliancePartsPros.com | Tuesday, April 21, 2015