Tuoya for Model Number KEMC308KSSO HI, 1. my microwave light is also not working anymore. Which light bulb should I buy? 2. I pull the microwave/oven combo out but didn't see the light bulb, do I have to unscrew the side panel to find the socket? Is it difficult to do? Is there a diagram on your side that can give me some idea? Thanks for all your help.
Answer Tuoya, The part number for the microwave cavity light bulb is WPW10440740. To replace the bulb, in most cases you can remove the control panel, and have access to the bulb. "1. Disconnect the electrical power to the microwave/oven combination. 2. Open the lower oven door. 3. Remove the bottom screw from each of the two side trim pieces. 4. To remove the side trim, pull the bottom out approximately 2?, and slide the top down to free it from the control panel. 5. Remove the screws from the oven control panel.6. To remove the oven control panel, pull it out at the bottom, and lift and unhook it from the oven cabinet support at the top. 7. Pull the ground clip on the end of the green wire from the edge of the metal panel, and disconnect the wire connectors from the board. Set the panel face down on a padded surface to protect the finish. 4. To remove the halogen lamp: a) Unclip the wire retainer and remove it.b) Remove the lamp from the holder and remove the wires from the harness." Hopefully you won't have to separate the microwave from the oven assembly. Thanks and Good Luck Read More... Answered by AppliancePartsPros.com | Thursday, January 12, 2012