Customer Questions and Answers for Washer Water Level Pressure Switch by Whirlpool

RS, Unfortunately, individual fill valve components for fill valves are not available, You'll need to order and replace the complete fill valve WP8528052 if that is the issue. To test the voltage to the fill valve, you'll need to unplug the power cord, remove the washer cabinet and bypass the lid switch. Disconnect the hot water solenoid wires (brown/red and white) and attach your meter leads to the wire terminals. You'll need to set the water temp selector to hot wash, cold rinse, and set the timer to a wash cycle aand pull out the knob. If the 120 VAC appears on the meter, you'll need the fill valve. If not, you, need to check the wiring back to the water temp. switch and the temp.switch circuit Brown terminal #5 to Brown/Red terminal#3.