Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Refrigerator Defrost Timer by Whirlpool

4.89 (64)
By: Whirlpool
Part Number: OEM17955633
Manufacturer Part Number: W10822278

Fixes ice buildup on freezer coils and warm fridge temps. This defrost timer regulates the automatic defrost cycle. Moderate DIY repair with video guide.

More
$34.75

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Refrigerator Defrost Timer (Part Number: OEM17955633)

View all Questions

Rafael for Model Number RS25AGXNQ02

Recently, my refer has been running and it is louder than usual for I have noticed. The refer side did not feel as if was cooling properly .There was barely any airflow coming through the vent and then finally none(evap motor not runing I figured). I noticed that the freezer back panel was frosted over. Once I took the panel off plugged back in and evap motor was working and airflow was resuming. Defrosted the coils whcih were frosted over manually with hair dryer .Figured that was it problem solved Feezer and refer working fine.Last few days I have noticed that freezer back panel is a bit frosty . To me I haven't noticed if the fridge has turned off to defrost mode. It just sounds on all the time and a bit louder than usual. My wife says I'm losing it ,but a feeling tells me there is something not right. Please help with any suggestions to test out

Answer

Hi Rafael. The process you are going through is a normal defrost issue. Normally the failure of the defrost thermostat part # WPW10225581, not closing as the defrost timer sends the 120 vac part # W10822278 to it . In The fresh food area at the top rt. side there is this defrost timer. With a large blade screwdriver you can advance this dial to the first heavy click to start the defrost cycle. At this point, did the timer send the 120 vac to the evaporator mounted defrost thermostat ? Was the graduations of the turning detents seem difficult to do ? It should turn positively easy. If not then this is a telltale sign of a defective part. If it does not send the voltage to the thermostat, it is bad. The thermostat has to close at 14° or below. If you test it with a ohm meter and a temperature gauge, then you can tell. If it does not close to send the voltage to the heater then defrost will not occur. Then you need to disconnect the evaporator heater and test for resistance between 8-11 ohms (approx.). If it is -open- it will not conduct heat. It is part # WP2323198. You can purchase a volt/ohm meter at the local hardware very cheap. Thank You.

Read More...

Answered by AppliancePartsPros.com   |   Tuesday, December 27, 2011

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google