Customer Questions and Answers for Refrigerator Defrost Timer by Whirlpool

Hello Nano. Here are the instructions from the manufacture. Hope this helps. Wire Basket To remove and install basket: • To remove basket, pull basket out to full extension. Tilt up front of basket and pull straight out. • To install, insert basket into refrigerator liner rails and push back into place Pullout Drawer Baskets (some models) (Door assembly of drawer removed from illustration for visual clarity) To remove and replace top basket: • Remove basket by pulling basket out to its full extension and lift out. • Replace basket by sliding into upper molded railing. To remove and replace bottom basket: • Remove basket by lifting basket from rail guides. • Replace basket by placing into rail guides. Ice Service Rack To install and remove rack: • To install, slide L-shaped groove of shelf down over back wall screw. Push rack back until screw is stopped in L-shaped groove (1) . Slide front portion of shelf over front wall screw (2). • To remove, perform above steps in reverse order. Fixed Freezer Shelf To remove and install shelves: • Remove shelf by pulling out to full extension. Tilt up front of shelf and pull straight out. • To install, insert shelf into refrigerator liner rails and push to back of compartment. Slide-Out Freezer Shelf To remove and install shelves: • Remove shelf by pulling out to full extension. Tilt up front of shelf and pull straight out. • To install, insert shelf into refrigerator liner rails and push to back of compartment.