Carolyne B for Model Number Amana ND2335AZW My dryer won't heat at all most of the time. Some times it's a bit warm but not much. When I put it at normal dry, the timer stops moving at the middle of the cycle. But it continues it's cycle eternally. I have to stop it manually (open the door) otherwise it will never stop. The 2 other cycles are ok. Goes from start till the end normally but no heat.
Answer Hi Carolyne, it could be an element 61927 or high limit/thermal fuse R9900489 failure but you should also check and clean your dryer venting for any restrictions. Here's a link to help you determine what you might need. http://www.appliancepartspros.com/repair-help/dryer-repair-help.html#electric Read More... Answered by AppliancePartsPros.com | Tuesday, December 18, 2012
Answer Hello Carolyne, You will want to check to make sure that you do not have an open heating element. Also check for the hi limit thermostat tripping easily or early open. Check the regulating thermostat for tripping easily or being open. Check to make sure that your thermistors are closed and not open. Also if the normal cycle that you are using is sensor dry you would want to check resistance on the sensor bars. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, December 18, 2012