Customer Questions and Answers for Timer by Whirlpool

Hello Al. Here are the instructions from the manufacture. Hope this helps. 1. Disconnect power to the machine. 2. Carefully life the timer knob and dial off the timer shaft by pulling the knob away from the face of the control console. 3. Remove the two timer mounting screws when the timer dial skirt is removed. 4. Disengage the console assembly from the top cover and roll forward. You will do this by removing the three screws securing the console rear cover plate across the rear top edge of the console. Grasp the console and rock the top of the console forward. Carefully lift and roll the console forward and remove the console. 5. Install the new timer in reverse order. Make sure the wires are connected properly.