Customer Questions and Answers for Timer by Whirlpool

Hello Brandon! Here is the timer removal/replacement according to the service manual for your unit. Hope this helps, thanks! TIMER REMOVAL: 1. Disconnect power to the unit. 2. Carefully lift the timer knob and dial off the timer by pulling the knob away from the control console. 3. Remove the two timer mounting screws (now exposed on the control console) when the timer dial skirt is removed. 4. Disengage the console assembly from the top cover and roll forward. CONSOLE REMOVAL 1. Disconnect power to the unit. 2. Remove the four screws securing the console to the rear cover plate. 3. Lay a drop cloth across the top cover of the washer. 4. Grasp the top of the console and gently rock the top of the console forward away from the rear console back. Note the hooked tabs on bottom of the console, which engage the slots in the top cover 5. For reinstallation, reverse the aforementioned steps.