Ned for Model Number MVWC400XW4 When the wash temperature is set to cold, both hot and cold water are dispensed. I am not getting any error codes in the diagnostic process. Is it likely the water valve? Thanks.
Answer Ned, the washer will intermittently activate the hot water valve during a cold water wash to maintain a specific temperature. However, if the hot water is coming in continuously and not stopping until the water is up to the set level, the thermistor W10876654 on the valve would need to be tested for resistance. At room temperature, it should measure between 40K to 50K Ohms. If the thermistor tests good, the main control W10480274 would be the cause of failure. Read More... Answered by AppliancePartsPros.com | Sunday, March 13, 2022