Attachment

Square key fastener for lawn tractors and outdoor power equipment. Secures drive components by fitting into shaft keyways. Replace if worn or missing.

This OEM part is a cotter pin for lawnmowers. The cotter pin is the small clip that secures the mower deck to the mower. A cotter pin can become rusted or damaged due to exposure to the elements. If the cotter pin is no longer securing the mower deck, then it will need to be replaced. Luckily replacing this part is a relatively simple fix.To replace the cotter pin, start by making sure the mower is turned off. After that, locate the old damaged pin. Use a pair of pliers to pull it out of its place. Once removed, slide the new pin into its opening and make sure it is set securely on the mower deck. Once secured, turn the mower on to see if the pin can hold the mower deck.This genuine replacement part is sold individually and is compatible with MTD brand mowers.

Click pins are used in various lawn equipment machines to hold the wheels on. For larger riding lawn mowers, click pins are only used on the smaller front wheels. The click pin penetrates through the axle spindle to hold the tire in place. The part can get lost, damaged, or wear out with regular use. It's also possible to misplace the click pin when changing a tire because it has to be removed first before working on the wheel. A missing, damaged, or worn click pin must be replaced.Click pins are very easy to replace with only a pair of pliers. Wear gloves when making the repair. Start by pulling out the old click pin from its location with the pliers. Insert the new click pin back into the hole located in the spindle.This click pin is a genuine OEM replacement part. It is made with durable, high-quality metal. It is supplied by the manufacturer. It is compatible with both MTD and Murray brands. The equipment the click pin can be used with includes lawn tractors, lawn machines, and other lawn equipment. It is sold as an individual unit.

Secures moving parts and linkages on tractors and outdoor equipment. Replace if bent, broken, or missing to prevent parts from detaching during operation.

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

Secures moving parts and linkages on lawn mowers and tractors. Replace if bent, missing, or corroded to maintain safe equipment operation.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

Auger won't turn or sheared off? This roll pin connects the driveshaft to the auger and acts as a safety shear pin. Quick 10-minute fix for most models.

Spring pin for lawn tractors, snow blowers, and outdoor power equipment. Secures moving parts and linkages. Replace if bent, broken, or missing.

This is an internal snap ring that can be found in many types of lawn and garden equipment. It is located between the spacer and bearing and is made of durable metal. The ring holds items steady and has an exposed area that functions like a shoulder to keep the assembly in place. Over time, the internal snap ring can become damaged through wear and tear or corrosion. It can also break and will no longer operate the way it should.If the internal snap ring is broken, corroded, or damaged, it will need to be replaced. Make sure the equipment is turned off and placed on a flat surface for the replacement process. A pair of snap ring pliers will be needed to remove the original internal snap ring. There is a plastic wheel cap located on top of the snap ring that needs to be removed first.This internal snap ring is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The snap ring is compatible with lawnmowers, chainsaws, and snowblowers manufactured by Yard-Man, Montgomery Wards, Huskee, MTD, Yard Machines, Troy-Bilt, and Cub Cadet.

Snow blower won't move or auger won't turn? This gear transfers power between components. Common fix for drive and auger system failures.

Left-hand double-thread worm gear for snow thrower auger drive systems. Replaces worn, stripped, or damaged gears that cause grinding or slippage.

If your snow blower won't move or gears slip, the transmission housing assembly may be damaged. This part houses critical drive components.

Spindle assembly with pulley for lawn tractor mower decks. Mounts to deck underside to support and spin blades. Replace if cracked, worn, or damaged.

Replace a worn or damaged flexible coupler causing power transfer issues in your snowblower attachment. Connects to the hub for reliable operation.