Parts for Electrolux CEW30GF6GSC: 03 - Backguard Parts

This electronic control is the main control board that manages cycle functions, timing and user inputs so your appliance runs the selected programs. It restores digital control when the original board fails. What it does:

• Controls and coordinates appliance cycles, timers and component relays.
• Interprets user inputs from the touchpad or knobs and sends commands to motors, valves and heaters.
• Common symptoms: unresponsive controls, no display or error codes, cycles that won't start or advance.
• Replaces a failed or intermittent control board that causes erratic operation.

• Disconnect power to the appliance before servicing to avoid shock hazard.
• Handle the board carefully; protect it from static and physical damage.
• Verify the part number on the existing board before ordering to ensure correct replacement.

This mounting bracket secures appliance panels or internal components to help keep parts aligned and stable during normal use. It replaces a worn or broken bracket to reduce movement and restore proper fit between parts. What it does:

• Provides a secure attachment point for panels, trim, or internal components
• Helps stop rattling, vibration, or shifting caused by a loose or damaged bracket
• Maintains correct alignment so doors, drawers or panels close and fit properly
• Supports structural stability where an OEM bracket has failed

• Disconnect power and empty the area before starting any repair
• Use original screws or fasteners; replace damaged hardware as needed
• Hand-tighten and then snug fasteners—avoid over-tightening which can crack plastic parts

This is a replacement control knob for a range or oven control shaft. It restores a secure, easy-to-grip interface so you can set temperatures and burner levels without slipping or binding. What it does:

• Fits onto the control shaft and provides a grip for turning temperature and function controls
• Allows precise selection of heat/burner settings when original knob is cracked, stripped, or lost
• Prevents accidental spinning from loose or worn knobs
• Restores safe, predictable control operation

• Disconnect power to the appliance before removing or installing knobs
• Pull the old knob straight off the shaft; align the replacement spline and push on until fully seated
• For gas appliances, ensure all controls are off and follow appliance manufacturer safety guidance

This electronic control board regulates the refrigerator's functions and user interface, restoring reliable operation when the original board fails. Replacing a faulty board can stop erratic behavior and restore normal temperature and display control. What it does:

• Manages compressor, fan, defrost and other timed cycles to maintain proper cooling
• Processes user inputs and controls the display/LEDs
• Can stop erratic cycling, unresponsive controls, or incorrect temperature behavior
• Helps resume normal operation when the original board is damaged by power surges or component failure

• Disconnect power to the appliance before starting any work
• Handle the board by the edges and avoid static discharge; use an anti-static wrist strap if available
• Confirm connectors match and seat fully; do not force plugs

This is a replacement mounting screw used to secure the appliance power/control board, restoring a solid electrical board connection and preventing vibration or loose contacts. Ideal for repairs where the original screw is missing or damaged. What it does:

• Fastens the power/control board to the appliance chassis to keep connections stable
• Helps prevent board movement that can cause intermittent electrical issues or noise
• Restores proper mounting after service or component replacement

• Turn off and unplug the appliance before starting any repair
• Use appropriate screwdriver and avoid over-tightening to prevent board or thread damage
• Wear eye protection and keep small parts away from children and pets

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

A single replacement mounting screw used to secure appliance panels, trim, or small brackets. Restores proper fastening so parts stay aligned and eliminates loose or rattling components. What it does:

• Fastens panels, brackets, or trim pieces to the appliance frame
• Secures components that vibrate or shift during normal use
• Helps stop rattling, misalignment, or gaps caused by a missing or loose screw
• Works as a direct hardware replacement where the OEM screw is required

• One screw

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread damage
• Disconnect power or follow appliance safety procedures before accessing internal components
• Replace all like fasteners for best fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.