Parts for Electrolux E30DF74TPSA: Backguard Parts

Replacement control knob for select ranges and cooktops. It mounts to the valve or switch stem so you can turn a burner or oven function on and choose a setting, restoring safe, reliable control. What it does:

• Attaches to the control shaft to operate a burner valve or control switch
• Provides on/off and level/temperature selection
• Common symptoms: cracked or broken knob, stripped insert/splines, loose or falling off, or inability to turn the control shaft
• Restores positive, accurate feel when selecting settings

• 1 control knob

• Disconnect power; ensure all burners are cool. For gas units, shut off the gas supply if needed.
• Pull the old knob straight off the stem; avoid prying against the bezel/control panel.
• Align the shaft flat/splines with the new knob and press straight on until fully seated.
• Test operation to confirm proper orientation and engagement.

The Indicator Light Lens is an OEM part for Frigidaire ranges and cooktops. It is designed to cover and protect the indicator light bulb, which signals when a burner is turned on or if the cooktop is still hot after use. This small component ensures that the light is visible and diffused properly, helping to prevent accidental burns or other safety issues.

Symptoms of a failing Indicator Light Lens include:

• Cracking or damage to the lens that impairs visibility
• Discoloration that makes it hard to tell if the light is on
• The lens becoming loose or falling off
• The light appearing overly bright or unfiltered

Causes of a bad indicator light lens typically involve high heat exposure, which can lead to cracking or warping, or accidental impacts during cleaning or use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This electronic control board regulates your appliance's main functions and user interface, restoring responsive controls and automatic operation when the original board has failed. It replaces a faulty control to help bring back normal performance. What it does:

• Receives input from control buttons and sensors and sends commands to components
• Manages timed cycles, temperature regulation, and other automated functions
• Can stop controls from responding or cause incorrect cycle behavior when failing
• Symptom-safe examples: unresponsive display/buttons, incorrect cycles, or erratic operation

• Disconnect power to the appliance before starting any work
• Handle the board carefully to avoid ESD (static) damage; wear an anti-static wrist strap if available
• Note connector locations and take photos before disconnecting wiring for correct reassembly

This main electronic control board manages refrigerator functions and user controls so the appliance runs and responds correctly. Replacing a failed board restores control logic and communication between the user interface and components. What it does

• Receives input from the control panel and sends commands to compressor, fans, defrost heater, and valves
• Regulates timed cycles for defrost and cooling to maintain proper operation
• Helps start or stop components based on sensor signals and user settings
• Common symptom linkage: unresponsive controls, no cooling or intermittent cooling, or erratic appliance behavior

• Disconnect power to the appliance before attempting replacement
• Handle the board by edges and avoid static discharge; use an anti-static strap if available
• Confirm connector locations and orientations before unplugging; replace one-to-one

This is a replacement mounting screw used to secure the appliance power/control board, restoring a solid electrical board connection and preventing vibration or loose contacts. Ideal for repairs where the original screw is missing or damaged. What it does:

• Fastens the power/control board to the appliance chassis to keep connections stable
• Helps prevent board movement that can cause intermittent electrical issues or noise
• Restores proper mounting after service or component replacement

• Turn off and unplug the appliance before starting any repair
• Use appropriate screwdriver and avoid over-tightening to prevent board or thread damage
• Wear eye protection and keep small parts away from children and pets

This wiring harness connects appliance electrical components to restore reliable power and signal routing. It replaces a damaged or worn harness to help eliminate intermittent operation, failure to start, or control and sensor communication issues. What it does:

• Routes power and control signals between components to enable normal operation
• Replaces frayed, burned, or broken wires that cause intermittent or no power
• Restores proper connections when loose or corroded terminals cause faults
• Helps resolve symptoms like no-start, intermittent cycles, or control errors

• One wiring harness as shown

• Disconnect power at the breaker or unplug the appliance before servicing
• Compare the harness to the original for connector type and length before installing
• Handle connectors gently and secure routing away from heat or moving parts

Size: 8-18ab x 0.5 inch.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.