Parts for Electrolux FGGF3058RWC: 02 - Backguard Parts

This control panel overlay restores the printed labels and icons on your range or wall oven's electronic controls. Replacing a worn or peeling overlay makes settings easy to read again without changing the keypad or control board.

• Provides the button legends and feature markings around the clock/timer or touch controls
• Refreshes the appearance of the control panel for a clean, factory look
• Helps protect the underlying keypad face from wear and smudging
• Common signs it's needed: faded or unreadable text, peeling/bubbling film, lifted edges

• Disconnect power before servicing.
• Remove the control panel as needed to access and remove the old overlay; clean the surface of all residue and dry thoroughly.
• Test-fit alignment, then peel the backing and apply gradually, pressing out air bubbles for a flat fit.
• If buttons do not respond after installation, diagnose the keypad/touchpad or electronic control; the overlay is cosmetic and provides labeling only.

The Control Board is an OEM part for Frigidaire ranges. This part manages and regulates the functions of the range, including the oven temperature, cooking modes, and timing, ensuring precise control and efficient operation.

Causes of a bad control board can include electrical surges, overheating, or component failures due to regular wear and tear.  

Symptoms of a bad Control Board include:

• The range or oven not powering on
• Inaccurate temperature settings
• The display showing error codes or not functioning properly
• Unresponsive or malfunctioning buttons and controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a replacement control knob for range models. It lets you turn the valve or switch to adjust burner or oven settings, restoring a secure grip and clear control when the original knob is worn, broken, or missing.

• Rotates the control shaft to set heat levels or functions
• Helps when the knob is cracked, stripped, loose, or missing
• Restores accurate, easy adjustment of the control
• Direct-fit design for the specified control shaft style

• Disconnect power and allow the appliance to cool before service
• Pull the old knob straight off the control shaft
• Align the new knob with the flat/D-shaft and press firmly into place
• Test for smooth rotation and proper engagement of the control

This control panel is the outer console that houses the range's touchpads and display, restoring the appliance's user interface and appearance. It provides a direct replacement for a damaged, cracked, or nonfunctional front console. What it does:

• Replaces the outer console that holds the control buttons and display window
• Restores secure mounting and alignment of the control/interface area
• Helps resolve issues such as cracked or warped panel surfaces and cosmetic damage
• Used when button covers or the front bezel are broken or severely worn

• One control panel (outer console) as shown

• Disconnect power to the appliance before starting any work
• Removal typically requires taking off nearby trim and control module fasteners; keep track of screws and clips
• Handle carefully to avoid scratching or cracking the replacement; transfer any electronic assemblies or bracketry only if required

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.