Parts for Electrolux FPGF3077QFE: 02 - Backguard Parts

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

This door switch detects when the appliance door is opened or closed and sends the signal to control lights or functions, restoring normal operation and safety. Ideal when lights won't turn on or cycles don't start. What it does:

• Opens and closes an electrical circuit when the door is ajar or shut
• Commonly used to turn interior lights on/off or enable control features
• Designed as a direct-fit replacement when the original door switch is faulty

• One replacement door switch

• Disconnect power before servicing to avoid shock or damage
• Access may require removing door trim or panel—refer to your model's service guide
• Handle terminals carefully; confirm connector orientation before reconnecting

This potentiometer is the user control variable resistor that lets the appliance vary a setting (speed, temperature or timer) from the front control panel. Replacing a faulty potentiometer restores responsive, smooth control. What it does:

• Converts knob rotation into an adjustable electrical signal for the appliance control
• Restores consistent setting changes when knob rotation previously produced no response
• Eliminates erratic or jumpy adjustments caused by worn or dirty contacts
• Used wherever a variable user input is required (e.g., temperature, speed, or timer control)

• Disconnect power to the appliance before starting any repair to avoid shock
• Access usually requires removing the control panel or console; keep track of screws and fasteners
• Note and label any wiring connections before disconnecting for correct reassembly

This small protective cap covers and protects exposed appliance hardware, keeping dirt and moisture out while preventing accidental contact. It's a simple replacement that restores a finished appearance and helps maintain part integrity. What it does:

• Covers and protects an exposed shaft, tab, or fastener from debris and wear
• Helps prevent accidental contact with sharp or moving parts
• Restores the finished look of the appliance where the original cap was lost or damaged
• Simple, passive part—no electrical or mechanical function to reconfigure

• One replacement protective cap

• Always unplug the appliance or disconnect power before servicing
• Remove the damaged cap by hand or with a gentle pry tool; press the replacement into place until fully seated
• Small part—keep away from children and pets; loss is common during disassembly

Replacement control panel that restores the appliance's front console—protecting controls and improving appearance. Replaces worn, cracked, or faded panels to keep buttons and displays readable and shield the control assembly. What it does:

• Houses and protects the control buttons, touchpad and display; provides a stable mounting surface for the console.
• Restores legible labels and icons when the original panel is scratched, faded, or damaged.
• Helps prevent dirt and moisture from reaching the electronic control components.
• Use the appliance part number to confirm fit before ordering.

• One control panel.

• Disconnect power (unplug or switch off the breaker) before starting any service.
• Installation may require removal of trim, screws, or the control assembly; handle any glass or painted surfaces carefully.
• Keep small fasteners organized during disassembly and test operation before final reassembly.

The Indicator Light Lens is an OEM part for Frigidaire ranges. This component covers and protects the indicator light, which signals when a burner or the oven is on, providing a visual cue for users to ensure safe operation.

Over time, the indicator light lens can become damaged or discolored due to heat exposure, regular cleaning, or accidental impacts. Causes of a bad indicator light lens include cracking, warping, or clouding that obscures the light.

Symptoms of a bad indicator light lens include:

• The indicator light not being clearly visible
• Cracks or breaks in the lens
• Discoloration or cloudiness that diminishes the brightness of the light
• The lens becoming loose or falling off

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Assembly is an OEM replacement part for Frigidaire ranges. It contains the electronic control board that regulates all cooking functions including temperature controls, timers, sensors and diagnostic systems for the oven, cooktop burners and grates.

Symptoms of a faulty control assembly include:

• Inability to change temperature or timer settings for the oven or cooktop 
• Oven fails to heat or burners won't light
• Error codes that can't be cleared during the baking or broiling cycles  
• Unresponsive buttons and control dials

Causes of failure can include liquid spills, power surges, or normal wear of electronic components over years of use. 

This OEM replacement is s also compatible for use in some Electrolux, Crosley, and Kenmore-branded ranges and cooktops.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.