Parts for Frigidaire CGGF3054MWB: 03 - Backguard Parts

This control panel overlay restores the printed labels and icons on your range or wall oven's electronic controls. Replacing a worn or peeling overlay makes settings easy to read again without changing the keypad or control board.

• Provides the button legends and feature markings around the clock/timer or touch controls
• Refreshes the appearance of the control panel for a clean, factory look
• Helps protect the underlying keypad face from wear and smudging
• Common signs it's needed: faded or unreadable text, peeling/bubbling film, lifted edges

• Disconnect power before servicing.
• Remove the control panel as needed to access and remove the old overlay; clean the surface of all residue and dry thoroughly.
• Test-fit alignment, then peel the backing and apply gradually, pressing out air bubbles for a flat fit.
• If buttons do not respond after installation, diagnose the keypad/touchpad or electronic control; the overlay is cosmetic and provides labeling only.

The Control Board is an OEM part for Frigidaire ranges. This part manages and regulates the functions of the range, including the oven temperature, cooking modes, and timing, ensuring precise control and efficient operation.

Causes of a bad control board can include electrical surges, overheating, or component failures due to regular wear and tear.  

Symptoms of a bad Control Board include:

• The range or oven not powering on
• Inaccurate temperature settings
• The display showing error codes or not functioning properly
• Unresponsive or malfunctioning buttons and controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control knob restores secure, tactile operation to a damaged or missing appliance control. It makes setting selection easy and helps return the control shaft to safe, predictable use. What it does:

• Replaces a worn, cracked, or missing control knob to restore manual control
• Provides a firm grip and detent feedback for accurate setting selection
• Fits directly onto the control shaft to enable normal operation of the control
• Useful when a knob is loose, won't turn, or is cosmetically damaged

• Disconnect power (unplug or turn off breaker) before servicing electrical appliances
• Pull the old knob straight off the control shaft and push the replacement on until fully seated
• If the new knob won't seat, inspect the control shaft and any retained insert for damage before forcing

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.