Parts for Frigidaire GCRG3038ADB: Backguard Parts

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

This small protective cap covers and protects exposed appliance hardware, keeping dirt and moisture out while preventing accidental contact. It's a simple replacement that restores a finished appearance and helps maintain part integrity. What it does:

• Covers and protects an exposed shaft, tab, or fastener from debris and wear
• Helps prevent accidental contact with sharp or moving parts
• Restores the finished look of the appliance where the original cap was lost or damaged
• Simple, passive part—no electrical or mechanical function to reconfigure

• One replacement protective cap

• Always unplug the appliance or disconnect power before servicing
• Remove the damaged cap by hand or with a gentle pry tool; press the replacement into place until fully seated
• Small part—keep away from children and pets; loss is common during disassembly

This backguard panel replaces the vertical trim behind the range controls to restore appearance and protect internal components from spills and heat. It gives a finished look to the rear of the cooktop while covering wiring and control openings. What it does:

• Covers and protects the rear control area and internal components from splashes, grease, and heat
• Restores the range's original appearance when the backguard is scratched, dented, or warped
• Provides the mounting surface for control hardware and trim pieces
• Helps maintain a sealed area behind controls to limit debris buildup

• One backguard panel (black stainless) as pictured

• Disconnect power to the appliance before any service to avoid electrical shock
• Removal typically requires lifting or removing the cooktop and/or control console; keep screws and small parts organized
• Use caution handling sheet metal edges to avoid cuts; wear gloves

The Overlay is an OEM part for Frigidaire ranges. It is a cosmetic component that covers and protects the control panel of the range. With a scratch-resistant surface, the overlay shields control buttons and displays from wear and spills in the kitchen. 

Symptoms of a bad overlay include:  

• Cracks, peels, or missing pieces in the overlay surface
• Faded or discolored graphics that are difficult to read  
• Exposed wiring or components under a broken overlay

Causes can be normal wear and tear over time, exposure to heat from the nearby cooktop, or damage from impacts or sharp objects.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board is an OEM component specifically designed for Frigidaire ranges. It plays a crucial role in regulating and monitoring the various electrical functions of the range, such as the oven bake/broil elements, ignition system, temperature display, and timer functions.

Symptoms of a bad control board include issues like:

• The oven not heating up or baking/broiling unevenly
• Electrical components like the display or controls malfunctioning
• Error codes appearing on the display
• Unresponsive or inaccurate temperature and time settings

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement control knob lets you select settings and operate the control smoothly again. It installs on the control shaft and restores a clean look and positive feel when the original knob is cracked, stripped, or missing.

• Mounts on the appliance's control shaft to turn the valve or switch
• Allows accurate selection of heat or function settings
• Replaces knobs that are cracked, loose, missing, or stripped and won't turn properly
• Helps ensure the pointer aligns correctly with OFF and selected settings

• Make sure all controls are OFF and the appliance is cool before starting
• Pull the old knob straight off the shaft
• Align the new knob with the shaft's flat/keyed side and press straight on until fully seated
• Verify smooth rotation and correct OFF alignment before use

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.