Parts for Kenmore 790.74239317 (79074239317, 790 74239317): Backguard Parts

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

White

Black

The Overlay is an OEM component specially designed for Frigidaire gas ranges. Crafted from durable heat-resistant material, it forms the control panel surface. 

Constant exposure to elevated cooking temperatures causes typical discoloration and cracks reducing visual appeal over the years. Interaction suffers without smooth finishes.

Signs of an aged or damaged overlay involve:

• Faded or stained graphics obscuring indicia  
• Gap separations appearing at seam boundaries   
• Exposed fasteners compromising an integrated look

Causes relate to routine thermal expansion and contraction stresses expected from daily cooking cycles. Impacts pose abrupt risks throughout use introducing impact fractures. 

Replacing with this OEM Frigidaire part restores a like-new interactive experience. Compatibility also fits some Kenmore, Gibson, and Electrolux ranges renewing controls cosmetics through authorized maintenance. Quality original overlays maintain your appliances' valued appearances.

This Control Board is an OEM part for Frigidaire ranges. It functions as a key electronic component, controlling and managing various features of the range, including oven temperature regulation, timer settings, and other operational functions.

Control boards can fail due to electrical surges, wear and tear over time, or due to faults in other components of the range. A malfunctioning control board can lead to a range of issues affecting the appliance's performance.

Symptoms of a bad control board include:

• The oven not reaching or maintaining the set temperature.
• The digital display is unresponsive or showing error codes.
• The oven or range functions not working correctly or inconsistently.
• The timer or clock features malfunctioning.
• The self-cleaning mode not operating as expected.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This is the adhesive control panel overlay for the oven/range clock and timer. It restores the readable labels and clean appearance of the control panel, making the buttons and settings easy to identify and use again.

• Provides the printed legends for the clock/timer and function keys
• Replaces worn, peeling, or faded button labels
• Helps resolve confusion over settings due to unreadable text
• Cosmetic/label component; does not correct electronic control failures

• Disconnect power before servicing
• Clean and dry the control panel surface thoroughly for proper adhesion
• Align carefully; test-fit dry before removing the adhesive backing
• Ensure old adhesive is fully cleaned off

The Gas Range Knob is an OEM replacement part for Frigidaire gas ranges and cooktops. It serves as the interface for selecting and adjusting the heat level on gas burners through a simple turn mechanism. 

Symptoms of a bad gas range knob include:

• Difficulty turning the knob or slipping/jumping movements
• Knob appearing loose, cracked or damaged
• Inability to accurately select low heat settings  
• Burner flames not responding as expected to knob position

Causes can be attributed to normal wear over extended use as knobs are rotated frequently during cooking. Exposure to excessive heat or impacts may also degrade plastic knob components.

This OEM Frigidaire replacement is compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This replacement control knob restores easy, accurate selection of settings when your original is cracked, stripped, or missing. It attaches to the control shaft so you can adjust temperatures and functions as intended.

• Attaches to the control shaft to adjust heat, time, or function settings
• Replaces knobs that are cracked, loose, missing, or spin without engaging
• Helps when settings are hard to select or the indicator no longer lines up
• Restores a secure grip and consistent feel during operation

• Disconnect power before servicing; also shut off the gas supply
• Remove the old knob; if a set screw is present on your model, loosen it before pulling off
• Align the new knob with the shaft and press firmly until fully seated
• Verify smooth operation and correct indicator alignment after installation

This outer door trim restores the finished edge and appearance of your appliance door. It replaces cracked, dented or missing trim to make the door look complete and help maintain proper alignment of adjacent parts. What it does:

• Covers and finishes the outer edge of the door for a factory appearance
• Helps hold adjoining panels and components in proper position
• Prevents sharp or exposed edges from being visible
• Common symptom: visible damage, dents, or loose/misaligned trim pieces

• Disconnect power to the appliance before starting any repair
• Remove any retaining screws or clips and handle trim and surrounding panels carefully to avoid damage
• Align trim into place and reinstall fasteners securely but do not overtighten
• If the trim attaches to glass or painted surfaces, use caution to avoid scratching

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.