Parts for Kenmore 790.74433810 (79074433810, 790 74433810): Backguard Parts

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

This end cap is a small replacement trim piece that restores a finished edge and helps secure a refrigerator shelf or rail. It prevents catches and improves fit for worn or damaged trim pieces. What it does

• Covers and protects the exposed end of a shelf rail or trim piece to prevent snagging.
• Helps hold shelf or rail components in place for a flush, secure fit.
• Restores cosmetic appearance where the original end cap is cracked, missing, or worn.
• Simple, durable plastic construction suited for normal refrigerator use.

• One end cap as pictured and specified by the part number.

• Disconnect power to the appliance before servicing to avoid injury.
• Access may require removing the shelf, bin, or rail; keep track of any screws or clips.
• End caps generally press into place or secure with a small screw or clip—do not force; align then snap or fasten per the original mounting.

This electronic control board regulates the refrigerator's functions and user interface, restoring normal operation when the original board fails. It controls temperature settings, defrost cycles and display responses for reliable cooling performance. What it does:

• Receives inputs from the user interface and sensors to manage compressor and fan operation
• Runs timed defrost cycles to prevent frost buildup
• Monitors temperature sensors and adjusts cooling to maintain set temperatures
• Fixes symptoms such as unresponsive controls, incorrect temperatures, or erratic cycling when the board is confirmed faulty

• One electronic control board

• Disconnect power to the appliance before service to avoid shock or damage
• Handle the board by edges and avoid static discharge; use a grounded strap if available
• Verify connector orientation and secure all plugs before restoring power

This control knob replaces a worn, cracked or missing appliance control knob to restore a secure grip and easy setting of heat or function. It helps make selecting oven or cooktop settings smooth and predictable. What it does:

• Replaces a damaged or missing control knob so you can change settings without slipping or difficulty.
• Provides a secure fit on the control shaft for accurate selection of temperature or element levels.
• Common symptom fixes: knob is cracked, loose, stuck, or won't stay on the shaft.
• Simple mechanical part — no electrical components.

• Disconnect power to the appliance (unplug or shut off circuit breaker) before servicing.
• Remove the old knob by pulling straight off the control shaft; align the splines and push the new knob on until fully seated.
• Do not force the knob; if it does not seat easily, check alignment or inspect the control shaft for damage.

This trim is a decorative finish piece for select ranges and wall ovens. It covers gaps and raw edges for a clean look and helps keep adjacent panels properly seated when the original becomes cracked, bent, or missing.

• Provides a finished appearance by covering exposed edges or gaps
• Helps maintain alignment of nearby panels or glass
• Replace if cracked, warped, missing, or no longer seats securely
• Common symptoms include loose/rattling panels and exposed or sharp edges

• Disconnect power; for gas models, also shut off the gas supply
• Wear gloves—edges can be sharp
• Remove old trim and transfer/reuse original screws or clips
• Align the new trim and secure with existing fasteners; confirm proper fit before reassembly

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.