Parts for Kenmore 790.74523910 (79074523910, 790 74523910): Backguard Parts

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

This control panel is the appliance's user interface that lets you select cycles, set options, and view status. Replacing a damaged panel restores reliable control and readable feedback from the console. What it does:

• Houses the touchpads/buttons and display used to start and program the appliance
• Sends user commands to the electronic control for cycle and option selection
• Restores visible status indicators when the original panel is cracked, faded, or unresponsive
• Helps resolve symptoms like unresponsive buttons, missing or dim display segments, or incorrect option selection

• Disconnect power to the appliance before starting any repair
• Handle the panel and display carefully to avoid scratching or damaging the finish
• Removal typically requires access to the top/front console and common fasteners; keep screws and connectors organized

The Control Board is an OEM part for Frigidaire wall ovens and ranges. As the central processing component, it controls critical functions including temperature regulation, cooking modes and timer programming.

Causes can involve regular wear over multiple heating cycles, exposure to moisture or direct power fluctuations over time.

Symptoms of a faulty control board include:

• Inability to adjust or maintain set oven temperatures
• Failures in convection, broil or bake elements cycling on/off
• Non-functional timer, clock or display screens
• Error codes or safety lockouts appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is the adhesive graphic that labels the buttons on the electronic control panel. Replacing a worn, peeling, or unreadable overlay restores a clean look and makes the keypad labels easy to see again.

• Identifies control functions on the electronic oven/range panel
• Adheres to the control face; no electronics are included
• Common fix for worn-off text, bubbling/peeling edges, or cracked graphics
• Helps refresh the panel's appearance after damage or heavy cleaning

• Disconnect power to the appliance before starting
• Remove knob(s)/trim as needed to access the existing overlay
• Carefully peel off the old overlay and clean the surface of residue
• Align and apply the new overlay; press firmly to bond without bubbles

The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.

Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.

Symptoms of a bad oven light rocker switch include:

• The oven light failing to illuminate when the door is opened
• The light remaining on even when the door is closed
• An inconsistent or flickering oven light
• The switch itself becoming loose, cracked, or non-responsive

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This control knob replaces a worn, cracked or missing appliance control knob to restore a secure grip and easy setting of heat or function. It helps make selecting oven or cooktop settings smooth and predictable. What it does:

• Replaces a damaged or missing control knob so you can change settings without slipping or difficulty.
• Provides a secure fit on the control shaft for accurate selection of temperature or element levels.
• Common symptom fixes: knob is cracked, loose, stuck, or won't stay on the shaft.
• Simple mechanical part — no electrical components.

• Disconnect power to the appliance (unplug or shut off circuit breaker) before servicing.
• Remove the old knob by pulling straight off the control shaft; align the splines and push the new knob on until fully seated.
• Do not force the knob; if it does not seat easily, check alignment or inspect the control shaft for damage.

This replacement control panel restores the appliance's front control surface to proper fit and appearance so buttons, switches, and the user interface mount securely for reliable operation and a finished look. What it does:

• Provides the mounting surface for control buttons, switches, and display assemblies
• Protects internal control components from spills and debris
• Restores a flat, undamaged front surface when original panel is cracked, dented, or warped
• Helps eliminate loose or misaligned buttons and improves user interaction

• Disconnect power to the appliance before beginning any work to avoid electrical shock.
• Handle edges carefully; metal panels can have sharp edges when removed.
• Transfer electronic components, buttons, or trim from the old panel per the service manual.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.