Parts for Bosch WAP24201UC/11: Base Assembly Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This transit bolt secures internal components during transport to prevent shifting or damage while moving or shipping an appliance. It's a simple fastener used to keep drums, tubs or assemblies stable until the appliance is installed. What it does:

• Holds the drum/tub or internal assembly in place during shipping and handling to reduce movement.
• Prevents rattling, banging or internal impact damage that can occur in transit.
• Helps avoid misalignment or wear caused by unsecured parts during shipment.
• Should be removed before first use to allow normal appliance operation.

• Install only for transport; remove prior to using the appliance and store for future moves.
• Tighten securely but avoid over-torquing to prevent damage to threads or mounting points.

This replacement foot supports and levels your appliance so it sits steady and operates smoothly. Replace a worn or missing foot to restore proper height, reduce wobble, and help protect surrounding surfaces.

• Supports the base/frame to maintain proper height and alignment
• Provides leveling adjustment so the unit remains stable
• Helps reduce rocking, vibration, and rattling during operation
• Replace if the original foot is cracked, stripped, missing, or won't adjust

• Disconnect power; shut off water or gas supplies if applicable
• Carefully tilt or raise the unit to access the foot location
• Remove the damaged foot and install the new one per design
• Level the appliance front-to-back and side-to-side; verify stability before use

This replacement flap restores proper operation by sealing or guiding an opening within the appliance assembly. Replacing a damaged flap helps maintain correct movement and alignment, preventing nuisance rattles and performance issues in the related area. What it does:

• Covers or seals an opening, chute, or compartment to maintain proper function
• Guides airflow, water, or items as designed within the assembly
• Hinges/snaps to allow controlled opening and closing
• Typical failure symptoms: cracked or broken plastic, flap won't stay closed, poor sealing, noise or misalignment in the affected section

• 1 flap

• Disconnect power and, if applicable, shut off water before servicing
• Wear cut-resistant gloves; edges and surrounding metal/plastic may be sharp
• Note the original orientation and hardware; take a quick photo before removal
• After installation, verify the flap moves freely and seals/aligns as intended

This replacement fixture assembly secures internal components and restores proper alignment and fit in compatible appliances. Replacing a worn or damaged fixture helps stop noise, prevent rubbing, and maintain safe operation. What it does:

• Holds adjacent parts in the correct position to prevent movement and misalignment
• Reduces rattling, vibration, or scraping noises caused by loose or broken supports
• Helps maintain door/panel fit and seals where applicable
• Restores the original mounting function to prevent further wear on connected components

• Disconnect power and water before beginning any repair
• Use basic hand tools; follow service manual or tech sheet for exact disassembly steps
• Handle carefully to avoid damaging surrounding trim, wiring, or seals

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

This band is a small retaining clamp designed to hold or secure appliance components in place, helping reduce movement and vibration for reliable operation. Use it to replace worn, bent, or missing retaining bands. What it does:

• Secures hoses, tubes, or small assemblies to prevent shifting or disconnects
• Helps reduce rattling and vibration-related noise
• Restores proper alignment of the secured component
• Can prevent intermittent operation caused by loose connections

• Disconnect power and water before beginning any repair
• Inspect the mating surfaces and replace any damaged clips or fasteners
• Use appropriate pliers or a clamp tool to install the band without over-tightening

This support mounting bracket secures internal components in place to keep your appliance stable and operating quietly. Replacing a damaged support restores proper alignment and reduces rattling or loose panels. What it does:

• Provides a stable mounting point for adjacent parts and assemblies
• Keeps components aligned to prevent vibration and noise
• Helps maintain door/panel fit and overall appliance stability
• Common symptom: loose or rattling parts, misaligned panels, or intermittent contact

• Disconnect power (and water, if applicable) before beginning any repair
• Keep track of screws and fasteners; reuse OEM hardware unless damaged
• Inspect surrounding parts for wear and replace if needed to ensure proper fit

This inner oven door window is the glass panel that restores clear visibility into the oven and protects internal components from heat and debris. Replacing a damaged or fogged window brings back a safe view of cooking without affecting oven operation. What it does:

• Provides a clear viewing surface so you can monitor food without opening the door
• Protects internal oven components from splatter and heat exposure
• Stops drafts and prevents further breakage when cracked or chipped
• Helps restore normal appearance when the glass is scratched, cloudy, or shattered

• Disconnect power to the appliance and allow the oven to cool completely before beginning
• Handle glass with heavy gloves and eye protection to avoid cuts
• Installation typically requires removing the oven door and a small number of screws or clips
• Use the exact part number to ensure correct fit; do not force glass into place

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.