Parts for Kenmore 791.7898894 (7917898894, 791 7898894): Basic Body Parts

Body-side spacer for gas range door or lid hardware. Installs on cabinet side to set correct stand-off and alignment. Replace if cracked or missing.

Rubber bumper that cushions the range door or drawer when closing. Replace if cracked, worn, or missing to prevent rattling and protect surfaces.

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

• The oven interior remains dark when the light switch is engaged.
• Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
• Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Replacement housing cover for your range. Installs on the exterior or internal housing assembly. Order a new cover if yours is cracked, broken, or missing.

Fix a range burner that won't heat or stays on constantly. This infinite switch controls surface element temperature. Moderate DIY repair in 30-45 minutes.

Fastener clip secures components in gas ranges. Replace if broken, loose, or missing to restore proper attachment. Verify fit with your model number.

Secures the oven bottom panel in place. Replace if screw is stripped, missing, or no longer holds the panel securely. Sold individually.

Secures range wiring to the cabinet to prevent loose or pinched wires. Replace if clips are broken or wires hang loose. Verify fit by model number.

Fix an oven door that won't stay closed or latch properly with this gas range door latch. Simple repair restores proper door operation and heat retention.

This replacement refrigerator door handle restores a secure, easy-to-grip surface for opening and closing the door and refreshes the appliance's appearance. It installs in place of a cracked, broken or missing handle to return normal door operation. What it does:

• Replaces a damaged or missing refrigerator door handle so the door can be opened and closed safely and easily
• Provides a stable grip and improves cabinet appearance when the original is cracked, loose, or cosmetically worn
• Aligns with factory mounting points to restore proper fit and clearance
• Helps prevent further damage from using temporary grips or improvised handles

• One replacement refrigerator door handle

• Use basic hand tools; support the door while removing and installing the handle to prevent shifting
• Keep items inside the fresh food compartment secure; consider having a second person assist with large doors
• Do not overtighten fasteners — snug is sufficient to avoid stripping threads or cracking the handle
• Replace any mounting hardware that is not present or clearly worn before finishing installation

Cover plate for gas ranges. Installs on the cooktop or control panel area. Replace if yours is cracked, broken, discolored, or missing for a clean look.

Plastic glide that attaches to the front of your range body to support the bottom storage drawer. Replace if cracked, broken, or missing for smooth operation.

This part has been discontinued by the manufacturer and is no longer available.

This part has been discontinued by the manufacturer and is no longer available.

This is an adhesive appliance label that replaces a worn, faded, or missing identification or warning sticker so vital product information stays visible and legible for service and safe use. What it does

• Provides a surface-mounted identification/warning label so model, rating, or safety text remains readable
• Restores faded, ripped, or illegible stickers commonly found on cabinets, doors, or control panels
• Helps technicians and owners confirm basic appliance information during service
• Prevents confusion from missing or damaged factory labels

• Clean and dry the mounting surface thoroughly before applying
• Peel backing and press firmly, smoothing from one edge to the other to remove air bubbles
• Avoid placing over vents, seals, or moving parts; align to match original label location
• Wear gloves if needed to prevent oils from reducing adhesion

This is a replacement adhesive label used to restore a faded, peeling, or missing appliance identification or instruction sticker. It helps keep model/serial, safety, or operating information legible for service and safe use. What it does:

• Restores readable identification, safety, or usage markings that were faded or damaged
• Reduces confusion from missing or illegible instructions or warnings
• Prevents misidentification that can lead to incorrect parts or procedures

• One replacement adhesive label

• Clean and dry the mounting surface before applying to ensure good adhesion
• Peel backing and press firmly, smoothing out air bubbles from the center outward
• Avoid stretching or trimming the label unless specifically required

This identification decal is a direct-fit replacement label that restores the factory-applied identification and informational marking on the appliance. Clear text and graphics help keep model/serial and key service info visible. What it does

• Replaces worn or missing identification and information labeling on the appliance
• Restores legible model, serial, and safety/operational markings so service and parts identification are easier
• Helps technicians and owners part numbers and service information during diagnosis
• Prevents misidentification caused by faded or damaged original labels

• Peel-and-stick adhesive—clean and dry the surface before applying for best adhesion
• Align carefully; once applied, most decals cannot be repositioned without damage
• No tools required for application; handle by the edges to avoid fingerprints on printed area
• Follow any appliance-specific safety steps (unplug or disconnect power) when accessing label location

This replacement appliance information label restores the printed identification, rating and safety text on the appliance so essential information is readable. Use it when the original label is faded, damaged or missing to keep markings clear and legible. What it does:

• Replaces worn or illegible manufacturer information, ratings or safety text
• Restores visibility of serial, model or rating areas so service and safety details can be read
• Helps prevent misuse by making required warnings and electrical/rating info readable
• Provides a neat, adhesive-backed identification surface for easy replacement

• One replacement information label

• Clean and fully dry the mounting surface before applying the label
• Align carefully and press firmly to ensure good adhesion; avoid repositioning after contact
• Replace only on a cool surface and avoid applying over wiring or moving parts
• Disconnect power and follow all safety precautions

This adhesive identification label replaces a torn, faded or missing appliance sticker so model, serial or safety information is legible again. It helps you confirm appliance details for service, parts or safety checks. What it does:

• Restores readable model/serial and specification information that is printed on the original sticker
• Replaces damaged or faded identification and safety labels
• Makes it easier to verify the correct part or service information before repair
• Helps meet safety and inspection needs by restoring visible manufacturer info

• One adhesive identification label

• Clean and dry the mounting area before applying to ensure good adhesion
• Peel backing and press label firmly; hold for several seconds to set
• Avoid placing on textured or insulated foam surfaces where adhesion may be poor

Protective wire shield for gas range safety valve. Replaces cracked, damaged, or missing guards. Installs over valve wiring for safety and protection.

This part has been discontinued by the manufacturer and is no longer available.

Secures components inside your range. Replace if the original nut is stripped, corroded, missing, or no longer holding parts firmly in place.

This part has been discontinued by the manufacturer and is no longer available.

Range door latch shield that covers and protects the top latch mechanism. Replace if cracked, broken, or missing to restore proper door alignment.

Sound dampening insulation for gas ranges. Installs inside the range cavity to reduce noise and provide thermal protection. Replace if worn, torn, or missing.

This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.

• Fastens the switch body to a bracket or chassis panel
• Helps keep the switch aligned for consistent actuation
• Replaces stripped, corroded, or missing mounting hardware
• Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area

• Disconnect power to the appliance before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Verify thread size and length match the original hardware
• If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment

This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.

• Fastens the switch body to a bracket or chassis panel
• Helps keep the switch aligned for consistent actuation
• Replaces stripped, corroded, or missing mounting hardware
• Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area

• Disconnect power to the appliance before servicing
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Verify thread size and length match the original hardware
• If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment