Parts for Ge GVS04BDWASS: 01 - Beverage Center Parts

This door gasket seals the refrigerator/freezer door to keep cool air inside and reduce energy use. A direct-replacement sealing strip that restores a tight door closure and helps maintain consistent temperatures. What it does:

• Provides an airtight seal around the door to prevent cold air loss and reduce frost buildup
• Helps the appliance maintain a stable internal temperature for food preservation
• Reduces compressor runtime by minimizing air exchange with room air
• Can eliminate common symptoms like warm fridge compartments, excessive ice, or a gasket that looks torn or misshapen

• Remove power to the appliance before starting; unplug or shut off breaker
• Gasket typically installs by inserting the flange into the door channel and securing with screws or clips as present
• Warm the gasket slightly (per OEM guidance) to ease installation and ensure even seating
• Inspect the door channel and clean before installing; replace if channel is damaged

This interior oven lamp restores cavity lighting so you can check food without opening the door. It replaces a burned or flickering oven light to improve visibility while cooking. What it does:

• Illuminates the oven cavity so you can monitor cooking progress without opening the door
• Replaces a bulb that is burned out, dim, or flickering
• Helps prevent unnecessary oven door openings that can affect cooking results
• Matches the OEM form and fit for compatible GE ovens

• One oven lamp

• Disconnect power to the appliance before replacing the lamp to avoid electrical shock
• Allow the oven to cool completely before handling the lamp or reaching into the cavity
• Use care when removing/installing the lamp—handle by the base or use a cloth to avoid oils on the glass
• Only use the lamp wattage/type specified by your appliance manufacturer

This replacement glass shelf includes a molded front stop to keep items from sliding forward and help contain spills. It restores usable, level storage inside the refrigerator and is a direct-fit shelf replacement. What it does:

• Provides a sturdy, level surface for food and containers
• Molded front stop prevents items from sliding or tipping when the door opens
• Replaces broken, chipped or cracked glass shelf surfaces
• Helps reduce spills and keeps stored items organized
• Slides into existing shelf rails for a secure fit

• Remove food and containers before installing; handle glass with care and use gloves if damaged
• Slide shelf into the existing shelf rails until fully seated with the stop facing the front
• No wiring or tools typically required; if shelf doesn't seat smoothly, check rails for obstructions
• If the shelf is cracked or shattered, dispose of broken glass safely

This upper shelf is a direct-fit interior shelf designed to organize food and maximize usable space inside the refrigerator. It replaces a damaged or missing upper shelf so contents sit level and stay accessible. What it does:

• Supports food containers, produce bins, and other stored items on the refrigerator's upper section
• Restores a stable, level surface when an existing shelf is cracked, warped, or broken
• Helps maintain organized storage to prevent items from tipping or spilling
• Fits into the factory shelf supports for a secure hold when installed properly

• Remove food and any loose items from the refrigerator before replacing the shelf
• Slide the shelf into the factory tracks or supports until it seats firmly; do not force or bend
• Handle carefully to avoid dropping or chipping the shelf and to protect glass or plastic surfaces

This bushing is a small replacement sleeve that supports and stabilizes a rotating or sliding shaft, helping restore smooth operation and reduce wear where a shaft passes through a housing. It prevents metal-on-metal contact and extends component life. What it does:

• Centers and cushions a shaft or pivot to prevent wobble and uneven wear
• Reduces noise and binding from worn or damaged bearing surfaces
• Protects housing and shaft from abrasion and scoring
• Helps restore proper alignment of moving components

• One replacement bushing

• Disconnect power to the appliance before beginning any repair
• Access may require removing panels, trim, or the component assembly; retain fasteners for reassembly
• Inspect mating shaft and housing for damage; replace if excessively worn
• Seat the bushing fully and test the mechanism for smooth operation before final reassembly

This adjustable foot is a replacement leveling leg that supports the appliance and lets you raise, lower, and stabilize the cabinet for a proper fit. Simple, durable support that restores even weight distribution and alignment. What it does:

• Provides height adjustment to level the appliance on uneven floors
• Stabilizes the cabinet to reduce rocking or tipping
• Helps doors close and seal properly when unit is brought back to level
• Prevents floor damage by providing a replaceable contact point

• One adjustable foot/leveling leg

• Use with appliance empty or supported; follow manufacturer guidance for safely supporting the unit
• Raise or lower foot by turning to adjust height; check level and repeat as needed
• Wear gloves and eye protection when working under the appliance

This is a replacement mounting screw used to secure components inside compatible GE appliances. It restores proper fastening where the original screw is missing, stripped, or damaged so parts stay aligned and operate safely. What it does:

• Fastens trim panels, brackets, or internal components to appliance cabinet and chassis
• Replaces missing or damaged screws that can cause rattling, misalignment, or loose parts
• Helps maintain proper component alignment for reliable operation
• Simple hardware repair to restore original fit where the factory screw is lost or worn

• Verify screw size and thread match the original before installation
• Use correct driver to avoid stripping the head; tighten until snug but do not overtighten
• Disconnect power to the appliance before working near electrical components

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This grounding wire is an exact-replacement electrical ground connection used to restore a safe, reliable chassis/ground path on appliances. It helps reduce shock risk and ensures proper grounding for electrical components. What it does:

• Provides a dedicated ground path between appliance chassis and circuit ground
• Restores proper grounding after damage, corrosion, or during part replacement
• Helps stop intermittent electrical faults caused by a missing or loose ground
• Supports safe operation of switches, controls, and motors by maintaining chassis potential

• One grounding wire assembly

• Disconnect power before inspecting or replacing any electrical wiring
• Confirm mounting points and terminal orientation match the original before fastening
• Use appropriate hand tools; secure terminals and strain reliefs to avoid wire chafing
• Replace damaged components and verify ground continuity with a multimeter

This display panel replaces the front console surface that houses the oven/range control and user interface, restoring visible readouts and button access for reliable programming and status feedback. It provides a clean, responsive face for the appliance controls. What it does:

• Replaces a cracked, faded, or non-responsive console surface so indicators and buttons are readable
• Restores visual status information such as temperature, timer, and clock displays
• Helps resolve issues where the face is damaged, buttons stick, or the display lens is obscured
• Works with the existing control electronics and keypad assembly to return normal user interaction

• Disconnect power to the appliance before attempting service to avoid shock
• May require removal of the control console and careful disconnecting of connectors or trim
• Handle the panel gently to avoid scratching the display lens or bending tabs