Black Max Edger Parts

Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

Starter rope won't retract after pulling? This recoil pulley and spring assembly fixes rope retraction issues on mowers and small engines. Direct fit.

Won't start or pull cord snapped? This recoil starter assembly engages the flywheel to start your mower, tiller, or chipper. Moderate DIY repair.

This genuine OEM Part is a choke temperature control rod for lawnmowers. The choke temperature control is the metal piece that regulates the choke temperature allowing for it to function properly within a lawnmower. If the choke function is no longer working efficiently, it might be time to replace the choke temperature control. Luckily, replacing this part is a simple repair.Before beginning, make sure the engine is cool to avoid getting burned. Locate the old choke temperature control rod and remove the screws to the mounting assembly that hold the rod in place. Once removed, lift the old choke temperature control out and away from the mower and set it to the side. Replace with the new control rod and secure the mounting screws. Start up the mower to see if the choke function is working properly. If it does, the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

A starter handle is a piece that works in combination with several other components to start the engine in numerous machines, including lawn equipment. It works when the user pulls the starter handle grip, attached by a mechanism to the crankshaft. It turns to start the engine. If the starter handle breaks, it will have to be replaced in order to start the machine. Starter handles can become damaged from normal use, misuse, or after an accident.Replacing the starter handle is a simple project. After locating the mechanism it attaches to, typically a sturdy rope or cord, the starter handle should be tied securely to the end of the string. Wear gloves to protect the hands during the process. Test the strength of the attachment before trying to start the machine.This starter handle is a genuine OEM replacement part. It is sold as an individual piece. This starter handle is made of durable, high-quality material. It can be used in devices from MTD, Husky, Troy-Bilt, Yard Machines, and Yard-Man. It is compatible with various lawnmowers, log splitters, trimmers, and other devices with pull start engines.

Muffler spark arrestor screen that installs inside the exhaust system. Replace if cracked, clogged with carbon buildup, or missing for safe operation.

Replacement flywheel for lawn mower and garden equipment engines. Installs inside the engine housing. Needed when original is cracked, damaged, or missing.

Fix slow or unresponsive brakes on your walk-behind mower. Complete brake assembly includes all components for a full brake system replacement.

Seals the connection between engine exhaust and muffler system. Replace if you notice exhaust leaks, loud operation, or visible damage. Verify fit with your model number.

Muffler assembly for lawn mowers. Reduces engine noise and prevents exhaust sparks. Replace if cracked, rusted, or damaged for safe operation.

This breather cover plate replaces worn-out, damaged, or misplaced cover plates to ensure the outdoor power equipment runs as smoothly as possible.Breathers are essential for internal combustion engines, as they let gases escape from the combustion chamber. If gases cannot properly vent, pressure within the engine will build which can lead to ruptured seals. Eventually, this can cause oil to spill into the combustion chamber and is very problematic for the engine. Without a breather cover plate, the breather cannot function properly. This part should be replaced whenever it is worn out or shows signs of deterioration. This breather cover plate is a genuine MTD replacement part and has been sourced directly from the manufacturer. This replacement breather cover plate fits various different models of MTD, Cub Cadet, Yardman, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

This breather gasket easily replaces old, worn-out gaskets to ensure the utmost efficiency of relevant outdoor power equipment.A worn out or deteriorated breather gasket can cause a number of issues such as high-idling and oil leaks. As breather gaskets age, they will need to be replaced. Breathers need to function properly, as they are critical for relieving engine pressure and reducing buildup of harmful materials within the engine. This breather gasket is a genuine OEM replacement part and has been sourced directly from the manufacturer. This replacement breather gasket fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and trimmers. Please note this breather gasket is sold individually.

This component bracket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, leaf blowers, snowblowers, or log splitters. The component bracket for one of these small engine appliances is responsible for attaching other components to one another, clamping those components in place, and orienting those components in the proper direction such that the engine can operate smoothly.When damaged, component brackets can loosen or disorient the components they are attaching together. This damage can come in the form of cracks, tears, punctures, piercings, or erosion of the metal material. If the component bracket suffers enough damage that it can no longer hold parts in place, it should be removed and replaced with this genuine OEM replacement part before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This component bracket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This governor arm shaft can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm shaft for one of these small engine appliances is a connecting part within the governor system; it is fastened to the governor cross shaft and is attached to the throttle linkage and the governor spring. Governor arm shafts can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm shaft can affect all of the surrounding components. As such, if a governor arm shaft suffers damage such that it cannot fasten components together, it must be removed and replaced immediately before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm shaft is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.