Black Max Lawn Mower Parts

This ignition coil assembly is a genuine MTD part, sold individually. This ignition coil assembly can be used as a replacement part for lawn mowers and string trimmers. This ignition coil assembly comes with all of the necessary components required to facilitate a complete replacement or a new installation of the part. The purpose of the ignition coil is to transmit the voltage from the battery of the appliance to ignite a spark in the spark plugs such that the engine can be powered on.If the ignition coil is not igniting the spark plugs and powering on the engine, it is likely that the component has suffered damage and will need to be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition coil assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Yard Man.

Governor springs are critical to maintaining the speed of outdoor power equipment such as lawn mowers. They are important for keeping speed steady regardless of how hard the engine is working. Governor springs sense changes in the workload of outdoor power equipment and adjust the throttle for the operator. For example, when mowing a lawn, long grass or steep areas can influence the engine load. Without a governor spring, the mower would not maintain a steady speed and the throttle would need to be manually adjusted.This governor spring is a genuine OEM part that has been sourced directly from the manufacturer. This replacement governor spring fits a number of different types of outdoor power equipment including lawnmowers, trimmers, and chipper shredders. It is suitable for various Cub Cadet, MTD, Craftsman, and Troy-Bilt models. Please note these governor springs are genuine manufacturer parts and are sold individually.

This crankcase cover gasket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, and log splitters. It is the component responsible for sealing the crankcase of the engine and protecting it from accumulating dirt and debris from the outside and from leaking oil from the inside.When damaged, crankcase cover gaskets can hamper their ability to seal the crankcase, thereby letting in dirt and debris or letting out engine oil. Look for cracks, tears, punctures, piercings, or erosion of the metal material. If the crankcase cover gasket is compromised, it must be removed and replaced immediately before the appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This crankcase cover gasket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This part is an air filter base gasket. The air filter base gasket helps seal the filter that the air runs through before going to the engine. This helps prevent dirt or other debris from entering the engine, which can cause extensive damage. A new air filter base gasket may be needed if upon visual inspection it is damaged in any way. If the gasket is not forming a seal as it is supposed to, there may be engine problems such as misfiring, stalling, or not starting at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter base gasket is compatible with engines, lawnmowers, log splitters, and trimmers that are manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This is a muffler gasket that is located between the engine exhaust and the exhaust system in various types of lawn and garden equipment. When the muffler gasket is in good shape, it prevents exhaust from leaking out of the tool. It comes with a substantial amount of flexibility so that it can expand in the presence of heat. The main task of the muffler gasket is to prevent leaking. If the gasket is damaged or broken, the exhaust may leak from the joint.A muffler gasket can fail due to many situations. It can dry out, lose its flexibility, or develop cracks or holes. Sometimes the muffler gasket will chafe and lose its resistance to heat so it dries out. Muffler gaskets can also tear due to the intense vibrations from equipment. The gasket will need to be replaced by taking out the engine and switching the muffler gasket for a new one.This is a genuine OEM replacement muffler gasket that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used in lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This part is a choke temperature control thermostat that is used on engines and lawnmowers. A choke temperature control thermostat is a standard component in outdoor power equipment that has a carburetor and ignition coil system. The purpose of the choke temperature control thermostat is to control the idle of the machine.A new choke temperature control thermostat may be needed if the original has burnt out. This component is especially susceptible to heat damage. If the choke temperature control thermostat is cracked, broken, or damaged in any way, this would warrant replacing the part as soon as possible. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This choke temperature control thermostat is a genuine MTD part. It is sold individually. This particular choke temperature control thermostat is compatible with engines and lawnmowers that are manufactured by MTD, Yard-Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This genuine replacement part is a muffler assembly for use with a lawn mower. The muffler is an essential part for the safe and reliable operation of a lawn mower. A muffler can help minimize the sound of the lawn mower engine. Additionally, it can help prevent exhaust sparks from exiting the mower and igniting dry grass, leaves, or debris. It can also help improve fuel economy of the mower. The main signs that a muffler may need to be replaced are a change in operating volume, lower fuel economy, or a bad odor during operation. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench may be needed for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair. Perform repairs only in a well ventilated area.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt, and more lawn mowers. Please note: original part number 751-14429 is now obsolete, and manufacturer has replaced the original part number with this part.

This is a high-quality muffler shield that can be used on many types of lawn and garden equipment. The muffler shield encloses and protects various small engine mufflers. This part is used to reduce the radiant heat coming from the motor. It also protects the muffler from damage from impact, dirt and debris, or other things. Each muffler shield is made of durable metal but can be damaged over time through ordinary use.If the muffler shield is malfunctioning or broken or the muffler doesn't come with a shield, a replacement can be used to rectify the issue. A wrench will be needed to remove the bolts on the old heat shield so the new one can be installed. Only make the replacement when the engine is cold. The spark plug wire should be disconnected before replacing this part in lawn and garden equipment.This muffler shield is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The muffler shield is designed to be used with lawnmowers, tillers, string trimmers, edgers, wood chippers, and log splitters manufactured by MTD, Craftsman, and Cub Cadet.

This is a piston ring set that can be used on many types of lawn and garden equipment. The piston rings are a set of components that ensure the proper level of gas compression is located between the cylinder wall and the piston. The piston rings are responsible for sealing the cylinder so that the gas generated during ignition doesn't leak into the gap between the cylinder and piston. The piston rings also keep the right amount of oil in between the cylinder and piston and improve heat transfer.Before replacing the piston rings, the spark plug wire should be removed from the tool. Make sure the gas has been drained from the fuel tank for safety purposes. Take the equipment and place it on a sturdy surface on its side. After accessing the engine, the new set of rings can be replaced for the old ones so the tool works correctly.This piston ring set is an authentic OEM replacement part kit that is directly sourced from the manufacturer. It is sold as an individual set. The piston ring set is designed to be used with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.

This is a genuine OEM replacement part for select Honda and MTD push lawnmower engines. This lawnmower fuel filter is essential for optimal engine performance. The part consists of a small red plastic rod and serves as a filter to ensure clean fuel is entering the engine. It will require replacement over time after clogging.The filter is responsible for screening dirt and other particles such as dust and debris from the fuel in order to prevent engine damage. Without this part, small particles can get trapped in the carburetor, which can potentially wreak havoc on the engine. Going for long periods of time without replacing the fuel filter can jeopardize the rest of the machinery. In addition, fuel filters will slowly clog up over time with accumulated debris, starving the engine of fuel. Signs to watch for that might indicate the fuel filter needs to be replaced include rough idling and an engine that will not remain running.Using a damaged or old fuel filter. The filter replacement is sold individually only.