Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
Usually ships within 4 - 14 days
This part is a replacement screw. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. If the current screw is defective or lost, this part can be used as a replacement. It is intended for use with outdoor power equipment.Screws are an essential piece of standard hardware that secures together different components. If the current screws are lost, corroded, stripped, or ineffective, they will need to be replaced with a genuine OEM part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referred to. This screw is suitable for use on outdoor power equipment manufactured by Midwest Engine, Briggs and Stratton, other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.
This is a replacement for a blower housing on select models of engines used in blowers and vacuums. The blower housing is a durable plastic part that holds the blower hose for intake and outflow of the air in the machine. This is where the fan will be located that creates the vacuum to suck air into or out of the unit and provide the proper operation. if the blower housing is damaged, broken, or otherwise not working, the unit may not function at all. This genuine OEM part is a replacement that is manufactured to exact standards by Briggs and Stratton. It can also be used in select models from Toro. It is going to be the solution for anyone who needs a new blower housing for their unit. This piece is sold as an individual assembly and does not include related parts or hardware; those will require a separate purchase. The blower housing will require screwdrivers to replace. Always wear gloves and disconnect the power supply before performing repairs like this. It will also be a good idea to work in a well-ventilated area and allow the unit to cool to avoid burns or other issues.
This replacement part is a screw. It is a genuine replacement part made by Midwest Engine. Screws are found in many different types of appliances and machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliances are loose or missing. Screws can become stripped over time. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require a screwdriver and perhaps pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.
This is a genuine replacement fuel line for use with Briggs & Stratton engines. This part is responsible for carrying the fuel from the tank to the fuel pump. The fuel line is attached to both the tank and carburetor using special clamps which hold it tight while making a water-tight seal. The clamps are included.The fuel pump is made of high-grade rubber, however, if left out in the weather, it will begin to break down, causing fuel to leak. Exposure to the elements is the most common cause of damage to this part.Replacing the fuel line is simple. Before replacing, ensure the fuel has been removed from the tank, or prepare a container to receive the fuel one the old line is removed from the tank. Using a clamp tool, release the clamp holding the fuel line and slide it from the fuel tank, and then do the same thing on the other end. When installing the new line, slide the clamps onto the line before placing on the mower. Then, using the clamp tool, slide the clamps into place. This fuel line is a genuine OEM replacement part. It is compatible with many Briggs & Stratton models and is sold individually.
This is a screw. A screw is a type of fastener that is used to secure parts together. This particular screw is used for various applications on outdoor power equipment machines.A new screw may be needed if the original is stripped, worn, or otherwise damaged in any way. If the screw is not fastening components together effectively, a new screw may be needed. This part is a genuine Midwest Engine part and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific screw is used on a variety of parts including control covers on snow throwers manufactured by Cub Cadet and MTD. It is also used on the snow hood of Toro snow throwers. This same screw is also used on the muffler guard of Briggs and Stratton engines, Toro snow throwers, Murray snow blowers and snow throwers, Snapper snow throwers, and Simplicity snow throwers.
This exhaust gasket is a genuine Midwest Engine replacement part for appliances that use small engines, such as chipper shredders, snowblowers, leaf blowers, and lawn mowers. The function of an exhaust gasket is to seal off the carburetor from the exhaust tube in order to protect the engine from the accumulation of dirt, debris, and gunk within the inner workings. The exhaust gasket may require replacement over time from general wear and tear. If the exhaust gasket is not sealing, allowing dirt and debris to accumulate within the carburetor and leaving the exhaust tube exposed, the part should be replaced immediately. Evidence of a damaged exhaust gasket could also manifest in the form of oil leakage, black smoke arising out of the exhaust tube, and unusually low pressure from the combustion when using the appliance. Any of these symptoms can be attributable to multiple factors, so one should assess if the exhaust gasket is responsible before ordering a replacement.This exhaust gasket is compatible with the following brands: Briggs and Stratton, Cub Cadet, Toro, and Simplicity. This part sold individually.
The carburetor primer is a replacement made for use on small engines, such as those found on lawn and garden equipment. When the bulb is pressed, it moves fuel from the tank to the fuel line and into the carburetor. Once the carburetor has been filled with fuel, any extra will go back to the tank through the return line.The carburetor primer bulb is made from plastic and it can start to wear out over time. It could eventually crack, which would require a replacement. If there is any damage to the primer, no matter how small, it should be replaced.The primer is made from high-quality materials and will work with a range of small engines. It is compatible with certain machines from Briggs & Stratton, Toro, and Murray. The primer is sold individually and it is a genuine OEM replacement part sourced from the manufacturer.