Parts for Briggs & Stratton 191702-2139-01: Blower Hsg,Rewind,Guards Parts

This replacement part is a starter pulley. This is a genuine replacement part made by Midwest Engine. Starter pulleys are common in different types of machinery that operate using different parts. Pulleys are able to connect different parts together and allow them to move during use so that the engine runs smoothly. A new starter pulley might be needed if the current one is no longer working as normal. This can include being damaged or stripped down over time. Due to the friction that pulleys frequently experience, becoming worn down is common and this part should be replaced when this happens. Be sure to wear work gloves as needed during this repair as to not get injured. This starter pulley is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This rewind spring, also known as the recoil spring, is an essential part in a small engine. Its job is to rewind the pull rope back into the starter housing and, should there be difficulty in retraction, it is often because the rewind spring has failed. This OEM replacement part works in the engines and starter systems of tillers, pressure washers, lawn mowers, snowblowers, leaf blowers, generators, edgers, and wood chippers. It is suited to brands like Toro, Cub Cadet, Briggs & Stratton, Lawn Boy, MTD, and others. The primary component is the spring, which is found inside of a metal housing. This part ships individually, and should the housing need to be replaced, it is a separate purchase.

When a starter rope is pulled, it will uncoil and provide tension to the spring and then engage the starter clutch, which turns the crankshaft to crank the engine. The starter clutch could have problems due to natural wear. It could also be damaged due to an incident with the machine. Corrosion could also be a factor since it is made from metal. When there are issues with the starter clutch, it will be difficult to get the engine started. The best course of action is for the operator to replace the clutch. This is a genuine OEM replacement starter clutch that is sold individually. The part can be used for many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, wood chippers, generators, and other small engines. Compatible brands include Craftsman, Toro, Cub Cadet, Lawn-Boy Simplicity, MTD, Murray, and Briggs & Stratton. Operators should ensure they are getting the correct starter clutch as a replacement.

Here is a replacement armature-magneto, also known as an ignition coil, for use with small engines. The part is capable of producing a high voltage, which is then used by the spark plugs, to start the engine. When the ignition coil is not working properly, it will be difficult and sometimes impossible to start the engine. If the spark plugs are not the problem with the engine starting, it could be due to a broken part on the armature-magneto due to wear and tear, the elements, or other forces. The armature-magneto may need to be replaced if it has failed. This is a genuine OEM replacement part sold individually. Spark plug boots will be sold separately. This part can be used for many models of snowblowers, tillers, lawn mowers, wood chippers, and other small engines. Brands compatible with the armature magneto include Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Simplicity, and MasterCut. Buyers will always want to ensure they are getting the proper ignition coil for their make and model.

The stop wire is a safety cable device offered on many types of lawn and garden equipment. It is pressed near the upper handle of a device to start it, which lets the blades spin and creates forward motion on equipment that is self-propelled. A stop wire can stretch out over time and will need to be replaced to ensure total safety. If the blade brake control is released and the blades continue to spin for more than a couple of seconds, the wire needs to be replaced.Take the equipment and put it on a flat surface before taking the metal on the stop cable and moving it out of the mower handle. Squeeze the center tabs of the wire with needle-nose pliers and pull the cable end through the bracket. Pull the other end out and then replace it with a new component.This is an authentic OEM replacement part for use with garden equipment engines. It is an individual part that is sourced directly from the manufacturer. This part is compatible with lawnmowers, wood chippers, snowblowers, generators, log splitters, tillers leaf blowers, and pressure washers by Briggs & Stratton, MasterCut, Craftsman, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Murray, and Wheel Horse.